Godox Propac PB960 Light Stand Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to mount a Godox Propac battery pack to a light stand.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This bracket is to securely mount the Godox PB960 battery pack to a standard light stand.
This is ideal if you intend to use them in the studio or on location. You can safely move the stand without worrying about the battery pack getting away from you. It's designed to clamp onto the top 1" section of the stand.
You slide the unit into the bracket with the battery detached as the battery is slightly bigger than the power supply. This also means you can swap or charge the battery without having to remove the whole thing from the stand.
You will need either a 1" long ¼" hex bolt, washer and nut or you can use a 25mm M6 bolt, washer and nut. I've created two different knobs - one for the ¼" nut and one for the M6. The nut just presses into the knob. A spot of glue probably wouldn’t go astray.
If you don't want to print the knob, you can just use a standard wing nut or even buy pre-made knob.