ESP32 E-Paper Weather Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame inlay and Screen Holder for ESP-32 E-Paper weather display created by Luke Marzen (lmarzen on github)
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 63
- Makes
- 1
- Views
- 2,202
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a picture frame inlay for Luke Marzen's ESP32 E-Paper Weather Display project wich can be found on github: https://github.com/lmarzen/esp32-weather-epd
I printed everything in PETG because it can very hot in my attic apartment.
If you want to hang the frame flush to the wall, I provide a drilling mask for the frame to get some ventilation to the indoor sensor
I used following components:
FireBeetle 2 ESP32-E
BME 280 (5V variant)
Good Display 7.5in e-paper (GDEY075T7)
5x self tapping pan head 2.3x6mm screws
8x DIN912 M3x10mm screws and Nuts
4x self tapping pan head 1.7x5mm srews
douple sided tape for attaching the battery
JST connectors and cables I had laying around