1 / 3
Inky Impression Spectra 7.3 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Inky Impression Spectra 7.3" and Raspberry Pi Zero W - with buttons
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Case has front and back parts, 2 legs and 4 buttons that need to be printed.
- Buttons might need some post print sanding to make sure the clearances are big enough for the display board buttons to return
- secured with 4xM2.5 bolts to the display board and 4xM2 bolts and nuts for the front face
- legs can be installed for portrait or landscape display
- Has enough clearance for Raspberry Pi Zero W
- Hole for cable is big enough for USB to power device but might need some post print modification
Printed using default settings in PLA
Software: https://github.com/NotmoGit/AstroInky