1 / 3
Centauri Carbon Riser - Slide & PTFE Relocation
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I like the simplicity of this model and the reviews of the fitment were correct. This model fits into the top of the Elegoo Centauri Carbon with almost a snap fit.
I removed the rear rim so the top plate can be slid backward for venting. I also added a relocated PTFE hole to allow for the maximum amount of slack inside the chamber. The brim is also raised to add space for 1mm thick foam tape to be used for lid vibration dampening.
I used these foam tapes to dampen any rattle and create a good seal for higher chamber temps. The adhesive is good, and the added friction for the top plate slider feels premium.
uxcell Sealing Foam Tape 5mm Wide 1mm Thick - https://a.co/d/932XeNd
uxcell Sealing Foam Tape 10mm Wide 1mm Thick - https://a.co/d/4dRFSYQ