1 / 3
Hanjiang 17mm radiator Shroud/mount for the FormD T1 — image 1
1 / 3

Hanjiang 17mm radiator Shroud/mount for the FormD T1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An experimental mount that gives just enough clearance to allow a full fan and the Hanjiang 17mm radiator.

Rating
0 / 5
Likes
3
Downloads
13
Makes
0
Views
226
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

This should solve the alignment issues you might get with just flat screws and the standard mount that comes with the T1 and should reduce audible noise by lifting the fans and radiator as high as they can be without interference. I took inspiration from Eiga's exhaust shrouds.

 

You can also use sim fans with thicker radiators for this, but Hanjiang worked perfectly fine and I wanted to prioritize airflow and the new P12 Pros that are coming out.

 

I used PLA and ran into no issues, but if you want to be on the safer side, use PetG or something just a little bit more temperature resistant. 

 

I will also update it to also cover the second fan and offer both a long single print one and a shorter two piece that can be screwed together similar to Eiga's at a later date. Also, I'll add more pictures in the future :V

 

Materials

  • 4 countersunk screws 
    • Should be at least 5mm longer than the fans
  • 4 flat head screws to mount the second pair of fans
    • Should be at least 3mm longer than the fans
  • Original short countersunk screws for FormD T1

 

Instructions

  1. Sandwich your fans between the shroud and the radiator. The flaps should face the outside on opposite end of where your main ports would be for the radiator (i.e. your g1/4 ports should be over the PSU end and the flaps should be over the rear io and under the power cord extender)
     
  2. Screw long countersunk screws into the radiator through the fan's screw holes
     
  3. Screw in your second fans
     
  4. Mount with original countersunk screws from FormD T1

Tags