1 / 3
GoFilm20 TrueRC Singularity Antenna Stem
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an insert to hold a TrueRC Singularity antenna in the stock antenna mount holes of the Caddx GoFilm20 cinewhoop.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 135
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
While upgrading the antennas on the GoFilm20 with TrueRC Singularity antennas i needed to make something that would hold them in place a bit better so they don't flop over.
I created this small brace intended to surround the antenna cable and hold it as high up as possible.
Print in TPU, and slide it into the stock openings. I trimmed down the top edge a tad for the length of antennas i had, you may or may not need to do so
Placed flat on the bed it should be printable without supports.
- Printer: Prusa CoreOne
- Filament: Overture TPU
- Infill: Default (15% - doesn't matter)
- Supports: No
- Orientation: long flat edge down