Honeycomb Accent Inserts for B.C. Rich Warlock Guitar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of honeycomb accents for the B.C. Rich Warlock guitar by @EG3Dprinting
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 92
- Makes
- 0
- Views
- 1,008
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
A set of honeycomb accent inserts for the AMAZING B.C. Rich Warlock guitar by @EG3Dprinting. Print each individually with spiral vase with 0 top and 0 bottom layers (or you can do solid as well, of course). I suggest using the combined STL and split by object to accommodate the printing unless you enjoy a good puzzle. I used a cheap black PLA, which is just fine for this job. I used default .2 mm layer height, .42 line width, etc… nothing special except spiral vase. You'll probably want to put a dab of plastic/super glue on these to keep in place.
Important note - by the time I made these I had already primed and painted. As such these inserts are scaled down to 98% of the original hole on the X and Y axis. If you're a better planner than me you'll want to do a test print and adjust the X and Y scale to fit your print.