HueForge BMW E30 M3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge of the iconic BMW E30 M§
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 82
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 225x225mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.6mm and the Actual Depth is 1.6mm
Filaments Used:
PETG BambuLab Basic White Transmission Distance: 4.8
PETG BambuLab Basic Gray Transmission Distance: 0.5
PETG GEEETECH BLACK Transmission Distance: 0.5
This print uses 3 unique filaments
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to BLACK for the rest.
Warnings about floating areas can be ignored.
If you want to scale it down or up only change in x and y. Keep the z size the same