1 / 2
American Morse Equipment Mini-B Paddle Sleeve Case (Updated) — image 1
1 / 2

American Morse Equipment Mini-B Paddle Sleeve Case (Updated)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sleeve and sleeve case for the AMI Mini-B paddle.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
55
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Updated Nov 2025 to v1.1.  Added some additional clearance for the adjustment screws and made the case wall a little bit thicker.

------

This is a case sleeve for the American Morse Equipment Mini-B sideswiper/single lever paddle. I designed this because I didn't like how easy it was to inadvertently actuate the paddle while holding it (the exposed screws would get squeezed by my hand). This case covers the screws, and increases the diameter to make it easier for those of us with bigger hands to hold comfortably. I also made a case sleeve just for a little extra protection while the paddle is rolling around inside your pack. Note that you must have your lever installed in the “down” position in order for it it to fit into the sleeve case. 

The cases are sized for a friction fit, so keep in mind that you may need to up/downsize them a percent or two depending on your printer's tolerances and what material you are using. FWIW, I printed with PLA on a Bambu X1C and everything fits just right.

 

Tags