Synology Push Lock Latch part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Synology push lock door latch for the drive caddy/tray
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 95
- Makes
- 0
- Views
- 843
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This part is to replace the lock/latch on the Synology drive caddy/tray. This piece is recommended for Resin printing, but FDM can work well.
This part is very tiny (~15mm in length) - Excellent bed adhesion is REQUIRED.
Note:
The added tiny brim under the blue diamond should be on the build plate, see the snapshot. It's best to print at least 4~6 pcs at once and space them apart at least an inch or two. Make sure the parts get enough cooling time and stick to the bed well.
Speed:
Initial layer - 10mm/s
40mm/s overall (or less)
Quality:
0.8mm/layer
Feeling lazy? Order the part completely:
https://www.amazon.com/gp/product/B0BWJ8LPC3