Synology Push Lock Latch part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Synology push lock door latch for the drive caddy/tray
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 843
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This part is to replace the lock/latch on the Synology drive caddy/tray. This piece is recommended for Resin printing, but FDM can work well.
This part is very tiny (~15mm in length) - Excellent bed adhesion is REQUIRED.
Note:
The added tiny brim under the blue diamond should be on the build plate, see the snapshot. It's best to print at least 4~6 pcs at once and space them apart at least an inch or two. Make sure the parts get enough cooling time and stick to the bed well.
Speed:
Initial layer - 10mm/s
40mm/s overall (or less)
Quality:
0.8mm/layer
Feeling lazy? Order the part completely:
https://www.amazon.com/gp/product/B0BWJ8LPC3