Skil PWRCORE 12 Battery Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery cover for Skil PWRCORE 12 batteries. A cover is no longer included with USB-C versions.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 65
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Overview
When Skil stopped including battery covers with the USB-C version of their Skil PWRCORE 12 batteries, I searched high and low for a replacement but with no luck. So, I designed one myself, modeled after the OEM cover included with the older batteries. This version is slightly oversized for easier printing and with minimal supports.
Fit & Adjustability
It's designed to snap into place with a satisfying “click” and minimal play. For easier troubleshooting, I've also included a diagnostic STL with a few walls and floors removed to help visualize fitment issues. Adjust your printer settings or the STL file as needed to dial in the model for your chosen printer and filament using this check piece.
Printing Info (Tested on an Elegoo Centauri Carbon using Elegoo PLA PRO)
- Layer height: 0.2 mm
- Elephant foot compensation: 0.2 mm
- Wall order: inner/outer/inner
- Wall loops: 3
- Sparse infill: 20%
- Supports: Enabled - Normal type, Snug style, 1 mm xy distance
- Brim: Disabled
- Filament used: 19.01 g (Model) / 19.36 g (Total)