Stackable Test tube Rack (Gradilla)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple test tube rack to hold up to 12 tubes of 25mm diameter by 60mm without glue and the minimal ammount of plastic.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 12
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I needed a test tube rack, but none of them were quite right.
Designed to hold up to 12 tubes measuring 25 mm in diameter by 60 mm, as shown. Although stackable, the structure cannot support much weight.
Some assembly is required, as no glue is used; all parts must be snapped into place. In my case, all parts fitted without scaling. If you have difficulty fitting the parts together, try enlarging or reducing that part by approximately 1%.
For every rack, you will need to print:
- 1 x Base
- 1 x Grid
- 2 x Side panel
Feel free to remix this simple design.
To get the same “skeleton", finish, simply reduce the number of top and bottom layers in your slicer and choose a fill pattern.