CNC Dust Collection Hose Boom System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust collection hose boom system
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I needed to get my dust collection hoses and spindle power cords organized and out of the way. There were solutions available but i was impatient and wanted to use hardware I could get at a local hardware store. I decided to design this system around ¾ inch EMT Conduit since its inexpensive and readily available. Each part also has screw holes and nut slots to allow you to fasten everything together for a snug fit. I'm currently working on a 1 inch emt version as well as a bracket to hold the hose right at the z-axis for even more support. If you have any feeback feel free to let me know in the comments. If you want to support me without a monitary commitment, id love to have you as part of my patreon community. The free tier has a lot of great stuff.
Thanks!
¾ inch EMT conduit i used - https://www.lowes.com/pd/Common-3-4-in-Actual-75-In-Metallic-Emt-10-ft-Conduit/3129553
Hook and Loop straps to keep hoses and cords in place - https://www.amazon.com/dp/B0CRVR4YW7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
the screws used were all M5 sized, the one to attach to the Onefinity base is M5 x 45mm