CNC Dust Collection Hose Boom System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust collection hose boom system
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to get my dust collection hoses and spindle power cords organized and out of the way. There were solutions available but i was impatient and wanted to use hardware I could get at a local hardware store. I decided to design this system around ¾ inch EMT Conduit since its inexpensive and readily available. Each part also has screw holes and nut slots to allow you to fasten everything together for a snug fit. I'm currently working on a 1 inch emt version as well as a bracket to hold the hose right at the z-axis for even more support. If you have any feeback feel free to let me know in the comments. If you want to support me without a monitary commitment, id love to have you as part of my patreon community. The free tier has a lot of great stuff.
Thanks!
¾ inch EMT conduit i used - https://www.lowes.com/pd/Common-3-4-in-Actual-75-In-Metallic-Emt-10-ft-Conduit/3129553
Hook and Loop straps to keep hoses and cords in place - https://www.amazon.com/dp/B0CRVR4YW7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
the screws used were all M5 sized, the one to attach to the Onefinity base is M5 x 45mm