1 / 8
Adjustable VESC Onewheel Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more.
The “foot” of the stand attaches to the “base” of the stand using:
Four M5x20, M5x25, or M5x30 countersunk screws
Printing Instructions
Print in your preferred material with as much infill as you like, but here are some print settings recommendations:
20% or higher infill should be plenty strong
Supports disabled
Once configured:
Print the model on its side, with no supports.
Take it off your print bed when it's done. Boom.