RC tyres OD85mm=3.3" ID56mm=2.2" W20mm=0.8"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print your RC tyres with some TPU filament. 14 different treads. 14 different tyre brands + 1 noname.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 94
- Makes
- 2
- Views
- 302
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning
Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones.
Printing
According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with a thicker tyre casing).
Print all the tyre parts whith à 100% infill.
Except the foam part where I use 5% infill with TPU 95A (but for a heavier model or a softer TPU filament increase the infill).
In your slicer :
- for the left tyres :
- keep only one left sidewall (delete the others)
- keep the right noname sidewall
- for the right tyres :
- keep only one right sidewall (delete the others)
- keep the left noname sidewall
You can set a change color for the 2 last layers to hightlight the brand.
Feedback
It is welcome.
Remark
Several tyres with different inner diameters and widths are available. If you need a specific size you can request; if it is easy I can do it with a one month delay max and free.
I will create later some tyres with bigger outter diameters.
Version
v1/v20250728