Invision MX450 Monitor Arm Raiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom raiser block for the Invision MX450 monitor arm. Adds clearance, improves stability, and protects desk surface.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
First make gets a coffee!!!
For your Invision MX450 Monitor Arm Raiser — aimed at users looking to improve monitor arm stability or height with a clean 3D printed part.
🖥 Invision MX450 Monitor Arm Raiser – Stability & Clearance Upgrade
Need extra clearance or desk protection for your Invision MX450 monitor arm? This custom-fit monitor arm foot raiser lifts the base of the MX450 slightly off your desk surface — perfect for:
Adding stability on uneven surfaces
Preventing pressure marks on wood or soft desktops
Creating extra cable clearance under the foot
Raising the monitor arm to align with other mounts
🧰 Features:
✅ Designed specifically for the Invision MX450 monitor arm
✅ Clean, stable footprint — distributes load evenly
✅ Slight taper and rounded edges for smooth fit
✅ Hollow design with a thick outer ring — strong but material-efficient
✅ Can be printed in PLA, PETG, or even TPU for slight cushioning
📏 Specs:
Width front: 122 mm
Width rear: 128 mm
Depth: 107 mm
Height: 10 mm (adjustable in OpenSCAD / Prusa Slicer)
Wall/edge thickness: 26 mm
Front corner radius: 10 mm
Rear corner radius: 12 mm
🖨 Print Tips:
Material: PETG or PLA+ recommended
Infill: 20–30%
Supports: Not needed
Orientation: Print flat on bed
Optional: Add rubber feet or stick-on pads underneath
💾 Download Includes:
MX450_Arm_Raiser.stl — print-ready model
MX450_Arm_Raiser.scad — fully parametric version (adjust height, size, radius)
Give your Invision arm the lift it deserves — with a clean, custom raiser designed for function and form.
Got another arm model? Remix the SCAD file and adapt it to fit yours!
The round cutouts were done by inserting negative cilinders.
1 big one CENTER, radius, 54 and +12 on the Y axis (object coordinates)
1 small one LEFT, radius 8, and -27 on the X axis and +38 on the Y axis (object coordinates)
1 small one RIGHT, radius 8, and +27 on the X axis and +38 on the Y axis (object coordinates)