1 / 11
Invision MX450 Monitor Arm Raiser — zdjęcie 1
1 / 11

Invision MX450 Monitor Arm Raiser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom raiser block for the Invision MX450 monitor arm. Adds clearance, improves stability, and protects desk surface.

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

First make gets a coffee!!!

For your Invision MX450 Monitor Arm Raiser — aimed at users looking to improve monitor arm stability or height with a clean 3D printed part.

🖥 Invision MX450 Monitor Arm Raiser – Stability & Clearance Upgrade

Need extra clearance or desk protection for your Invision MX450 monitor arm? This custom-fit monitor arm foot raiser lifts the base of the MX450 slightly off your desk surface — perfect for:

Adding stability on uneven surfaces

Preventing pressure marks on wood or soft desktops

Creating extra cable clearance under the foot

Raising the monitor arm to align with other mounts

🧰 Features:

✅ Designed specifically for the Invision MX450 monitor arm

✅ Clean, stable footprint — distributes load evenly

✅ Slight taper and rounded edges for smooth fit

✅ Hollow design with a thick outer ring — strong but material-efficient

✅ Can be printed in PLA, PETG, or even TPU for slight cushioning

📏 Specs:

Width front: 122 mm

Width rear: 128 mm

Depth: 107 mm

Height: 10 mm (adjustable in OpenSCAD / Prusa Slicer)

Wall/edge thickness: 26 mm

Front corner radius: 10 mm

Rear corner radius: 12 mm

🖨 Print Tips:

Material: PETG or PLA+ recommended

Infill: 20–30%

Supports: Not needed

Orientation: Print flat on bed

Optional: Add rubber feet or stick-on pads underneath

💾 Download Includes:

MX450_Arm_Raiser.stl — print-ready model

MX450_Arm_Raiser.scad — fully parametric version (adjust height, size, radius)

Give your Invision arm the lift it deserves — with a clean, custom raiser designed for function and form.
Got another arm model? Remix the SCAD file and adapt it to fit yours!

The round cutouts were done by inserting negative cilinders.

1 big one CENTER, radius, 54 and +12 on the Y axis (object coordinates)

1 small one LEFT, radius 8, and -27 on the X axis and +38 on the Y axis (object coordinates)

1 small one RIGHT, radius 8, and +27 on the X axis and +38 on the Y axis (object coordinates)

Tagi