Tea bag dispenser for openGrid and Multiboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for tea bags that uses Multiconnect Rails to be attached to openGrid or Multiboard
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 39
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There is not much to say I guess. Here's another tea bag dispenser.
This one can be attached in a french cleat way to https://www.printables.com/model/1214361-opengrid-walldesk-mounting-framework-and-ecosystem using either just the Multiconnect pins or in addition with https://www.printables.com/model/1368797-opengrid-multiconnect-rails.
Tea bags have slightly differing formats but the ones I get here (roughly 58 x 64 mm).
I have only tested it with openGrid light but I assume that it works just as well with the regular openGrid and with the https://www.printables.com/model/1105286-multiconnect-rails-for-multiboard to connect to https://www.multiboard.io/.
I am using PLA with sparse infill (20-25%). Most of the model is walls anyway.
You will need support for the rail hook - I had the best result with manual tree support on my K1.
Ah, and you'll need to flip the model to lay flat on the bottom. I might correct that in a future upload for convenience.