Bosch Orbital Sander 2.5in Vacuum Port Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to connect a 2.5in shop vac hose to a Bosch ROS20VSC orbital sander
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 89
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a press-fit adapter to connect common 2.5 inch shop vac hoses to the dust port on a Bosch ROS20VSC orbital sander. There is a slight angle to help keep the hose from dragging on the workpiece and/or table.
No hardware is needed, the adapter is a friction fit over the O-ring that is on the sander's dust port. The hose is also press-fit. The inner diameter of the adapter is 57.8mm and is a tight fit around the vacuum hose.
Keep in mind that this adapter is airtight and you may need/want some way to decrease the suction depending on your setup so you don't over stress your shop vac motor.
Recommend to print with at least 4 walls. You may consider supports for the interior of the adapter. I printed mine in ABS, but other materials may work too.