Bosch Orbital Sander 2.5in Vacuum Port Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to connect a 2.5in shop vac hose to a Bosch ROS20VSC orbital sander
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a press-fit adapter to connect common 2.5 inch shop vac hoses to the dust port on a Bosch ROS20VSC orbital sander. There is a slight angle to help keep the hose from dragging on the workpiece and/or table.
No hardware is needed, the adapter is a friction fit over the O-ring that is on the sander's dust port. The hose is also press-fit. The inner diameter of the adapter is 57.8mm and is a tight fit around the vacuum hose.
Keep in mind that this adapter is airtight and you may need/want some way to decrease the suction depending on your setup so you don't over stress your shop vac motor.
Recommend to print with at least 4 walls. You may consider supports for the interior of the adapter. I printed mine in ABS, but other materials may work too.