Grandma's Favorite Poopcatcher and Nozzlewiper Combo for the Kobra S1 and S1C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nozzlewiper for the Poopshoot of the Anycubic Kobra S1 which uses two A1 Mini Wiper and the orginal metal catcher
- Rating
- 5 / 5
- Likes
- 62
- Downloads
- 221
- Makes
- 0
- Views
- 1,955
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Vanilla-Klipper: If you are using vanilla Klipper on your S1 and want on this Wiper optimized Wipe logic
let me know, I am using a custom one
Hybrid Design: A1 Mini Silicone & Original Metal Scraper
Hi! After a long development phase and many prototypes, I am excited to share this nozzle wiper with you. It has been thoroughly tested to ensure the best cleaning results for your Kobra S1. 😊
IMPORTANT: Safety Check
Before your first print, please perform a manual check:
Ensure the wiper is fully inserted.
Verify that there is a gap between the nozzle and the plastic parts to prevent melting.
Printing Instructions
Material: I highly recommend PETG, ABS, or ASA. Avoid PLA due to the heat.
Supports: Designed to print without supports.
Note: If your printer struggles with bridging, please add manual supports.
Z-Offset: If you use my print profile, always double-check your Z-offset before starting!
Assembly & Modification
This system combines A1 Mini silicone brushes with the original metal scraper from your S1.
Prepare the Brushes: Both silicone brushes must be shortened in height.
Tip: Use the Nozzle thanks to the help of M4d53 for the perfect height.
Trim one brush in length and the other in width by half.
Installation: Glue the silicone brushes in with rubber adhesive or superglue.
Metal Scraper: Insert the metal scraper into the dedicated slot. A drop of superglue ensures it stays put.
Expert Tips: Removal & Maintenance
Removing the Original Metal Scraper: To remove the scraper from the stock "poop shoot," apply some Isopropanol to the adhesive area. Let it soak for a while to loosen the glue, then gently pry it off with a spatula.
Removing the Entire Unit: 1. Move the heatbed manually until it is slightly underneath the wiper/catcher. 2. Slide a spatula between the bed and the catcher. 3. Slowly manually raise the bed (Z-axis). The bed's movement will safely push the unit upwards and out of its mount.
How do I get the metal scraper back ? : lightly warm the metal with a lighter. Once the surrounding plastic softens, you can easily lever the scraper out with a screwdriver.
Credits
Inspired by the great work of:
I hope you are as happy with the results as I am :)