1 / 10
Adapter: Cen-Tec QuickClick [32mm/1.25"] -to- Craftsman Professional Orbital Sander — image 1
1 / 10

Adapter: Cen-Tec QuickClick [32mm/1.25"] -to- Craftsman Professional Orbital Sander

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapts the Craftsman Professional Orbital Sander [#315.279890] to a Cen-Tec QuickClick [32mm/1.25"] hose system

Rating
0 / 5
Likes
3
Downloads
3
Makes
0
Views
56
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

A simple yet sturdy adapter to connect the Craftsman Professional Orbital Sander [model # 315.279890] to a vacuum/dust collector/dust extractor utilizing the Cen-Tec QuickClick [32mm/1.25"] hose system.

I designed this to fit snugly, yet still be removable without breaking things in the process. You may need to make some minor tweaks in your slicer, or do some post-printing adjustments (i.e. sanding).  This is dependent on your sander, your printer, and material you use. I would strongly suggest using a material like PETG or ASA, if possible.

 

 

-----

Printed on an AnkerMake M5C-B using ~82g of Creality CR-PETG (Grey) in 2hr 18min with the following settings [AMStudio]: 0.4mm nozzle, 0.20mm layers, 100% Concentric infill, 9 layer (walls), 7 layers(top/bottom), Concentric top layer & bottom layer patterns, Concentric Ironing, grid supports, no brim.
 


**Note**: Yes, 100% infill is overkill…but it only takes about 10g more material, and actually was faster than printing at 15% or 20% triangle infill. Besides…overkill is under-rated!

Tags