Adapter: Cen-Tec QuickClick [32mm/1.25"] -to- Craftsman Professional Orbital Sander
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the Craftsman Professional Orbital Sander [#315.279890] to a Cen-Tec QuickClick [32mm/1.25"] hose system
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple yet sturdy adapter to connect the Craftsman Professional Orbital Sander [model # 315.279890] to a vacuum/dust collector/dust extractor utilizing the Cen-Tec QuickClick [32mm/1.25"] hose system.
I designed this to fit snugly, yet still be removable without breaking things in the process. You may need to make some minor tweaks in your slicer, or do some post-printing adjustments (i.e. sanding). This is dependent on your sander, your printer, and material you use. I would strongly suggest using a material like PETG or ASA, if possible.
-----
Printed on an AnkerMake M5C-B using ~82g of Creality CR-PETG (Grey) in 2hr 18min with the following settings [AMStudio]: 0.4mm nozzle, 0.20mm layers, 100% Concentric infill, 9 layer (walls), 7 layers(top/bottom), Concentric top layer & bottom layer patterns, Concentric Ironing, grid supports, no brim.
**Note**: Yes, 100% infill is overkill…but it only takes about 10g more material, and actually was faster than printing at 15% or 20% triangle infill. Besides…overkill is under-rated!