Sensor-Bracklet SPS30 for SensorBox V2 (FreeCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Bracket to hold a Sensiron SPS30 particle sensor. The bracket can be glued onto the SerialCarrier of the SensorBox.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 52
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
A Bracket to hold a Sensiron SPS30 particle sensor. The Bracket can be glued onto the SerialCarrier of the SensorBox (V2). The Sensirion SPS30 is only snapped in.
The Bracket respects the design rules from the Sensiron datasheets and comes with air deflector straight, angled or even without (not recommended).
I put my FreeCAD-file into the project, so you can customize the Bracket - there exists a parameter-spreadsheet in the FreeCAD-file to do modifications.
The Bracket was printed on my SonicVyper from Eryone PLA black, a 0,4mm nozzle and with 0,2mm LH. I printed it on its bottom surface and added a bit of tree support to hold the horizontal walls of the air deflector.