1 / 1
Carvera Air: Air Assist 360
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
360* Air Blast for Carvera Air
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 110
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The air assist is great for clearing chips and cooling the tool and workpiece. But, having the nozzle out to the side means it is ineffective in deeper pockets and when the workpiece blocks the nozzle.
This design slips over the existing nozzle and gives you 4 micro jets, on all 4 sides of the tool, shooting at a much steeper angle.
Superglue in two 5/16" diam x 1/8" tall neodymium magnets, and install an o-ring approximately D=6mm d=1.55mm