1 / 2
Spool Separator and Stabilizer for Filamentalist SAMLA Edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It prevents Spools in the SAMLA Box with Filamentalist from Tilting and keeps them better alligned.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It prevents Spools in the SAMLA Box with Filamentalist from Tilting and keeps them better alligned.
You could either use the printed Screws, or M5x8mm screws and washers. (You need 10 of both)
Build Instructions:
First i mounted the middle sepparator and drilled the 2 holes for it,
then ive used the drill template from the Filamentalist-Samla Edition and marked the
other positions, drilled the other 8 holes and mounted the 4 side separators with the screws.