1 / 3
Proboat Horizon Harbor RC Tugboat Paddleboard Pusher — image 1
1 / 3

Proboat Horizon Harbor RC Tugboat Paddleboard Pusher

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Gadget that lets you propel and steer yourself on a paddleboard with ease using an RC tugboat.

Rating
0 / 5
Likes
4
Downloads
10
Makes
0
Views
844
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Turn yourself into cargo with this gadget for the incurably lazy!

This fits onto the back of a paddleboard (by default it’s designed for an NSP 10’ board) and allows you to push and steer yourself around with an RC tugboat. The one I used was Proboat’s 30” Horizon Harbor though this should work with all other similar sized tugs. The curved shape allows you to steer yourself by pushing at an angle, and keeps the bow centered when going straight, modeled after the tugboat notches on real barges.

I used 1/2” foam weatherstripping for grip where the end of the board fits in. If your board is different, you can use thinner or thicker foam. Make sure the more curved side of the paddleboard slot faces upward, as there is a slight angle to the pushing surface.

Printing Tips:

Print in PLA, you can resize if your board is extra thick at the back. When printed sideways it needs no support. I did 3 layer wall thickness and 15% infill and it was plenty strong. Total print time was about 1.5 hours.

Tags