Cam For Use in a Legare 400 Circular Sock Knitting Machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cam for use in a Legare 400 Circular Sock Knitting Machine
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cam for use in a Legare 400Circular Sock Machine that I designed for a friend where the steel cam in her machine had worn out.
I printed this cam in PETG and ASA and the person who I designed the cams for hasn't yet made any socks using the 3D printed cams, so I don't know if they will last for one pair of socks or a hundred.
I did print using 100% percent fill so the cam has the greatest chance of holding up
The holes that the screws that attach the steel block that attaches to the cam are not initially threaded, but are sized such that the screws will cut their own threads the first time they are installed.