Counting matching models…
Additional cylinder and ribber dials with higher amount of needles. But beware, the yarn slots are about 0.8 to 1mm smaller than for a 60 or 64 cylinder, so it might be necessary to use a thinner yarn with these variations. You will need…
Stand for CSM accessories: ribber stand: can only hold the ribber, if you don't use any additional accessory accessory stand: holds, the ribber, the colorwork yarn mast and a single 6mm pin for the counter It can only be used with a…
If you don't want to print the frame cutting template in 3D, I have taken the liberty of converting it into an SVG to print on paper instead. This paper template has the benefit of marking the center of the holes for easy alignment. The…
I made these containers to store and protect my unused CSM cylinders from dust and cat hairs. I made the boxes stackables, and with slots counts on the side to identify each cylinder "size". In my case, I printed my cylinders and ribbers…
This is a printable replacement fan cover for a Consew CSM series "servo" motor. It accepts M2 mounting hardware for a CUI Devices AMT-103V encoder for monitoring and controlling motor speed. Also included is the file for an adapter piece…
Ganz CSMG tram speed/brake controller
I saw a similar design on facebook reels and modeled my own design after failing to find it on the internet. The device attaches to the collar of the CSM and helps keep the yarn from rising up on the needles and possibly causing missed…
A CSM Heel Weight for approx. 500g or lead ball bearings. I also wanted something a bit more aesthetic for myself than the solutions I looked at. Print with 4 walls, 15% rectilinear infill, 5 top/bottom layers in PETG or PLA+ - examples…
Print solid 100% infill in PETG - have the slots facing up when you print, no brim or supports needed. Pandel had a great idea to use the spare needles for the 'CSM for Mom and You' to create a latch hook tool and I needed heel forks..…
Fantastic hook modelled by Tmpx64 ! Print Solid, 100% infill in PETG - Scaled in height and thickness to work with my heel forks and heel weights. 1cm thick, 2inch x 1inch. Please download the original model as well!
If you don't want to print the frame cutting template in 3D, I have taken the liberty of converting it into an SVG to print on paper instead. This paper template has the benefit of marking the center of the holes for easy alignment. The…
Dimensionally accurate 2mm thick shell of the Apollo Command and Service module. You can use it as a model or if you want to enclose something inside it for some reason. In my case, i made it to put some leftover PETG and PLA trash inside…
This mount is inspired by the briBrain tiny whoop mount, designed to protect the flight controller from impacts due to the camera smashing into it. The MS Armor Mounts are designed to be the most protective of the design series. These…
Heel forks, or heel hooks for a circular knitting machine. These tools are used to add weight in specific places of the sock while knitting a heel, to keep the correct tension. The fork is a single piece that can be printed without…
This is the “Smoke Stopper” a 3.5" FPV racing frame developed by me (MagicSmoke_). This frame was designed to address 3 main issues: - Frame needed to be durable (as I am not made of money) - Frame needed to mount a 25mm x 25mm aio square…
A super simple holder that slides on the ¼ rod of the CSM to keep the yarn off the table.
A nice thick and solid buckle to use to attach your weights to your knitting! Works with older (antique) weights as well as newer weights. Solid design with a tight fitting hinge means it won't come loose easily. Remixed from a design by…
This OpenSCAD file describes my version of a circular knitting machine. This is an original design, but some details and ideas were obtained from various sources . User RoundandRound ( https://www.thingiverse.com/RoundandRound ) very…
This is the Minecraft story mode admin (AKA romeo) which has been made into a concept skin for noli in forsaken but got scrapped. Print this in PETG for best results, and you can paint him if u want (which is what I always do with my…
This cone spoke will fit yarn mast poles 8.6mm (0.34in) dia or smaller and has been test fitted on an NZAK (shown in blue) and Jeeping Johnny V2 (not shown). The mast hole in the cone spoke does have some extra tolerance which may cause…
This is my original design for the contest of the Fall into knitting Origin The inspiration for this hand-crank yarn winder came from my wife. She often uses a Circular Sock Machine (CSM) to knit socks, and before she can begin, she needs…
This heel fork uses knitting machine needles instead of wire. I'ev found that the needle. Hooks are much better at grabbing the yarn, and the needles are held in much better than wire. I just used some glue and shoved in the wedge and…
The CSM designed by Rkstar42 does not have a holder for a counter but this design by Joshua De Lisle does. Print the file digital_counter_holder.stl then one each from this model. I've attached mine with double sided adhesive tape. Or use…
I made this tool for setting the knitting tension on my CSM (sock knitting machine). I have the model designed by RkStar42 . So this tool works on this machine but might work on others too. I find measuring below the cam (green on my…
HSW support kit for the double driver CSM ver.2
When I switch out my cylinder I want to keep it the ribber dial and the setup bonnet together. The Lid screws on. Because it is a a 7,5mm plastic rod it is not designed for strong forces but it is stronge enough for my usage. It is…
I saw a similar design on facebook reels and modeled my own design after failing to find it on the internet. The device attaches to the collar of the CSM and helps keep the yarn from rising up on the needles and possibly causing missed…
A CSM Heel Weight for approx. 500g or lead ball bearings. I also wanted something a bit more aesthetic for myself than the solutions I looked at. Print with 4 walls, 15% rectilinear infill, 5 top/bottom layers in PETG or PLA+ - examples…
Print solid 100% infill in PETG - have the slots facing up when you print, no brim or supports needed. Pandel had a great idea to use the spare needles for the 'CSM for Mom and You' to create a latch hook tool and I needed heel forks..…
Fantastic hook modelled by Tmpx64 ! Print Solid, 100% infill in PETG - Scaled in height and thickness to work with my heel forks and heel weights. 1cm thick, 2inch x 1inch. Please download the original model as well!
Dimensionally accurate 2mm thick shell of the Apollo Command and Service module. You can use it as a model or if you want to enclose something inside it for some reason. In my case, i made it to put some leftover PETG and PLA trash inside…
This is a modified version of the yarn carrier guide of the CSM modified by Pandel. I made it to use 3mm rod instead of 2mm: as I had none available, I modified the model ^^ Edit: infact, the brass rod I used is not exactly 3mm, but 2.9mm…
"In the grim darkness of the far future, there is only... the payload!" Bring the chaos of Teufort to the battlefields of the 41st Millennium with this set of 9 replacement heads featuring the iconic mercenaries from Team Fortress 2.…
The "standard" yarn clips are annoying because they're bulky and not very strong. This is a very simple print for a yarn clip that is much stronger, takes up less space and is very easy to slide onto the end of the yarn. It works with…
Yarn Holder and Cutter for knitting machine yarn mast This is a yarn holder and cutter that attaches to your knitting machine or CSM yarn mast! It can hold the yarn to keep it out of the way and/or cut it off using a fast one-handed…
When fixing dropped purl stitches on a CSM, it's almost impossible to get into the machine with a regular-sized latch tool. In the past I've used a ribber needle, but they're very hard to grip. So I made this tool as a very short handle…
This is a handle for a CSM cylinder needle to make a latch hook. It remixes the already awesome "CSM cylinder needle handle" by user pandel. The latch hooks from the Singer knitting machines have a few differences that I prefer over this…
This is a customizable desk organizer with drawers, tool slots and a side pocket. It is originally designed to store Circular Sock Machine tools as used by the CSM v2 by JeepingJohnny and, because it's an OpenSCAD model, it can be adapted…
Small remix for pandel's CSM crank handle. Compared to the original model, only the depth of the bearing cutout has changed -- from 7mm to 16mm (left: old, right: new). This way, the nut/bolt doesn't stick out at the end. I've added the…
When I printed the JeepingJohnny circular knitting machine, one of the most expensive components were the needles! I wanted to be sure I didn't lose any and I wanted them to be organized so swapping between the different cylinders would…
An adapter for a CSM (Circular Sock Knitting Machine) bobbin winder to allow the use of empty yarn cones. Category: Hobby
Since I didn't see the right size bolts to attach the CSM to a table at my local store I just modeled some up and printed them. But - I also found the piece of plywood I was mounting my machine to was pretty iffy quality and drilling that…
Knitting Machine Buckle for Circular Knitting Machines By: Dani_Angel License: Knitting Machine Buckle © 2023 by Dani_Angel is licensed under Attribution-NonCommercial-ShareAlike 4.0 International Description: This work was created with…
I built JeepingJohnny's Circular Sock Machine and noticed that the Yarn Stand Brake did not work as I had seen other CSM brakes working in various videos on youtube. I made some slight modifications and now it pinches the yarn. This…
I recently built JeepingJohnny's Circular Sock Machine . I love using this build and I have made some cool socks. One issue that has repeatedly arisen is the weight ballast (ball bearings) has fallen out of the Yarn Stand Weight Cup,…
I have remixed Jannomag's shelving for the honeycomb storage wall (HSW) by widening the shelves to fit a Hitronic CGN3ACSMR modem with a footprint of 177 mm x 45 mm plus a 1 mm buffer on both sides. Print Details: EL3D HPLA Layer height -…
A bit tough to print, but using a brim keeps the legs all in place.
In the 1KG Base there is a heath-set M3 insert. the hook is bend from a 3mm steel rod and M3 thread on the end. Customisable for parts that can be found locally. The Fusion 360 file is also available so you can modify it to lour liking.…
Simple CSM weight buckle. use 2 M3 bold's as hinge-pins. The Fusion 360 file is also available so you can modify it to lour liking. A full weight set is also available here on Printables…
Edited to add: I have discovered that this tool is the perfect thickness to use when lowering needles back into work. With it sitting on the cam ring (vintage Gearhart) just push the needles down with your hand. The butts stop them and…
Deutsch: Da ich nirgendwo ein Mini-STX Gehäuse gefunden habe, musste ich es selber erstellen. Mini-STX Form Factor: 5.5 in. x 5.8 in. / 14.0 cm x 14.7 cm Der originale Intel Lüfter war mir zu hoch, deshalb trennte ich den Lüfter ab und…
Customized version of https://www.thingiverse.com/thing:3553275 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3553275 Printed in PLA Pro on Ender 3 Pro No brim, support on build plate only (so only…
Handle for an original CSM cylinder needle (no. 7) to make a latch hook. Simply press the needle into the grip (tight fit) and glue the wedge into place to secure it. Print the handle standing upright on its front using a brim.
Some useful tools regarding knitting on a CSM: Heel fork Heel fork weight box (fill with BBs, about 250g) Main weight box (fill with BBs, about 1700g total, use M6 threaded hook) CSM crescent tool small needle box (cylinder/ribber) bigger…
I made a new crank handle for MrRoboto19's wonderful CSM. This handle is a bit larger and has two skateboard bearings which makes it run a lot smoother in my opinion. Print two of the shims. To assemble the handle you need additionally:…
OLDER VERSION - ONLY USE IF YOU WANT TO STAY WITH ORIGINAL TENSION CAM FIXTURE! BETTER VERSION WITH EASIER TENSION CAM ADJUSTMENT: https://www.printables.com/de/model/712571-csm-camshell-upgrade-for-side-mount-ribber-with-ea NEWER VERSION…
This is a modified version of the yarn carrier guide of the CSM version which JeepingJohnny introduced. The idea is based on KaitlynABCs remix. In my case, I had the problem that the yarn was fed a little uneven through the big whole on…
If you stop knitting and the crank handle is not in its down or up position it can happen, that its own weight forces it to turn and thus also turns the camshell. In knitting direction this is no problem, but the opposite is. With the…
This crank arm gives a little bit more room and power, especially useful while knitting with the ribber and more or thicker yarn. I noticed while making a e-wrap selvedge that my old crank arm wasn't able to transmit more power evenly (!)…
First of all a big thank you to JeepingJohnny and all the predecessors in making these great models. With these models you can use E6000/S80 needles which are much easier to get in Europe. I had some issues with the rounded groove design…
IF YOU ARE USING IT WITH JEEPING JOHNNY'S CSM, THIS PART HAS TO BE USED IN COMBINATION WITH THE “Frame Shorter.stl” and “Yarn Stand Mount Separate.stl”! If you use the bigger “Frame.stl” then the distance between the pre-set yarn mast…
Sometimes you want to feed a second yarn directly from the back to the front of the yarn guide in addition to your main yarn, but without the use of the spring system. This extention helps. You need an additional M3 screw to attach it.…
Normally, you can set the needle switch on the tappet plate to the needles-IN-work or needles-OUT-of-work position, with which you can avoid ribbing per se, but you are not able to crank backwards, let's say for heels and toes, as the…
The original ribber dial adjustment procedure was something like this: To adjust the ribber needle position in relation to the cylinder, you had to unscrew the dial adjuster screw, try to find the position, tighten the screw or take the…
Fixed CSM camshell file for the 3-post collar that printed in 2 halves
This remix adds an easier way to adjust tension on the tension cam and, to have the option to use the modified ribber arm with the side-mounted posts with the CSM version from JeepingJohnny (MrRoboto19 remix) or my colorwork yarn mast, an…
If you are planning for colorwork, then this yarn mast is a possible choice. It is mounted to the same post mounts as the ribber on the camshell and will turn around the center of CSM while you are knitting. You need the camshell with…
A variation on the counter housing that also includes two yarn cone holders and cups for accessories. I wanted my CSM to be portable as I travel often so I've mounted it on a wooden box which allowed a spot to add this shelf as well. I've…
USE VERSION 2 Slot is larger - the original screw will now fit . Support only needed “build plate only” Holes and slots have printed fine without supports. Version 2 was printed on a Bambu P1S. Only the slanted side slot needed a little…
The bow on the original model was just slightly too long. It should rest on the teeth of the plate in order to grip the fabric. I did not make any changes to the toothed plate. Assemble with 3mm x 8 or 10mm screws. I did need to ream out…
Quick remake of the handle to be compatible with a common M5 x 40 SHCS. Aesthetics influenced by the original handle. Includes a cosmetic cap which should be a tight friction fit, no glue required.
