1 / 4
Vudoo Gun Works V22 Magazine +1/+2 Extention — image 1
1 / 4

Vudoo Gun Works V22 Magazine +1/+2 Extention

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

16 AUG 21 Update: The last 6 magazines I received are much tighter than the 7 I had previously purchased. I have added…

Rating
0 / 5
Likes
2
Downloads
24
Makes
0
Views
397
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

16 AUG 21 Update: The last 6 magazines I received are much tighter than the 7 I had previously purchased. I have added a new version, named Vudoo Extention v2, that has a slightly wider channel. These fit my new magazines better.

These extensions are designed for Vudoo Gun Work's .22lr AICS magazines. I use 10 round polymer magazines, and these will not work on the aluminum magazines. In a 10 round magazine you can load 11 rounds with the loading button installed or 12 rounds with the loading button removed. The button can be removed and installed without disassembling the magazine. If you remove the floor plate retainer you can get 13 in, but I have not tested feeding.

Everything except the floor plate is reused. This design makes it easy to disassemble the magazine by pushing the button on the bottom of the magazine into the body of the magazine using a small screwdriver. The extension can then be slid off of the magazine. No modifications need to be made to the original components.

The "Tight" version is a few thou tighter than the other version. This seems to work better with certain types of PLA on my Ender 3.

They are designed to print without supports. I printed them in PLA+. I model in inches, so you may need to scale the .stl after importing it into your slicer. For most slicers, scale to 2540% to convert from inches to millimeters.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2mm

Infill:

95

Filament: Any PLA/PLA+ Any

Category: Other

Tags