1 / 1
Genmitsu Cubiko CNC Spoilboard - Flat Head + Countersink | Multiple Variants
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Remix of @JimmySpeegle_752748 Cubiko Spoilboard, but with recessed Screws for Flathead and Countersink Screws.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 203
- Makes
- 2
- Views
- 607
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Thanks again for @JimmySpeegle_752748 providing the base model.
I used a copy of the hole pattern to redraw the Spoilboard and made several variants:
- M5 Flat Head Counterbore (2.8 mm Depth, 11.2mm Dia.) for the outer Edges
- M5 Flat Head Counterbore (2.8 mm Depth, 11.2mm Dia.) for the inner Edges
- M5 Flat Head Counterbore (2.8 mm Depth, 11.2mm Dia.) for all holes
- M5 Countersink Screw as Counterbore (1 mm Depth) for the outer Edges
- M5 Countersink Screw as Counterbore (1 mm Depth) for the inner Edges
- M5 Countersink Screw as Counterbore (1 mm Depth) for all Edges
All variants with and without the cutout for the homing sensor.
On some Models the Cutout for the homing sensors is 2mm less to not interfere with the holes. I didn't test if that actually works with the sensor, yet.
The board is 5mm - 1mm thicker than the original - to keep the strength when using counterbores.