Counting matching models…
I made this model myself after I bought the model from The Clack Shack off of etsy. I made this one because the model from The Clack Shake does not fit the shipped model of the cubiko plus I wanted to share a free model for the community.…
Thanks again for @JimmySpeegle_752748 providing the base model. I used a copy of the hole pattern to redraw the Spoilboard and made several variants: M5 Flat Head Counterbore (2.8 mm Depth, 11.2mm Dia.) for the outer Edges M5 Flat Head…
The cnc clamps here were designed in order to get the biggest possible working area for three different PCB dimensions: 70x50, 100x70 and 120x80 (mm). For good results: clamps should be mounted as symmetric as possible (with respect to…
Click the clip on the left slide of the housing and slide it to the right over the switch. This one will stay on and press the switch as it should be.
Wasteboard to protect the bed. Using M5x8 Bottom Head Screw or Flat Head Screw (not counter sink). Drawing from Gemitsu is included.
Overview I recently started experimenting with DIY PCB milling on my Genmitsu Cubiko CNC and quickly realised that most PCB holders online were designed for 3018-style CNC machines using aluminum extrusion beds and T-nuts. The Cubiko…
Following the example of the original author, I've posted the STEP file in addition to the 3MF and STL versions. I'm going to be using mine for not only coaster etching but also PCB prototyping. I'll probably make a version with…
This is an attachment for the Genmitsu Cubiko laser module to hold a hose in place for air assist. I have a 6mm hose, if you want another diameter let me know, I used 20% infill and grid supports, went full speed. You will need 2 3mm…
Print using whatever, slips over the build plate, screw in your clamps as per usual. EDIT: Added a circuit board clamp for 6x4 sized boards in the same style, there are a few notches on either end to be able to attach something to do…
This is a model that I created using SHAPR3D to mount an old Wyse USB camera on the CNC spindle/laser mount in order to remotely monitor my CNC/Laser engraving-etching jobs. I've included the STEP, 3MF, and STL files in the hope that…
Following the example of the original author, I've posted the STEP file in addition to the 3MF and STL versions. I'm going to be using mine for not only coaster etching but also PCB prototyping. I'll probably make a version with…
This is an attachment for the Genmitsu Cubiko laser module to hold a hose in place for air assist. I have a 6mm hose, if you want another diameter let me know, I used 20% infill and grid supports, went full speed. You will need 2 3mm…
Print using whatever, slips over the build plate, screw in your clamps as per usual. EDIT: Added a circuit board clamp for 6x4 sized boards in the same style, there are a few notches on either end to be able to attach something to do…
This is a model that I created using SHAPR3D to mount an old Wyse USB camera on the CNC spindle/laser mount in order to remotely monitor my CNC/Laser engraving-etching jobs. I've included the STEP, 3MF, and STL files in the hope that…
