1 / 4
Genmitsu Cubiko: Optimized PCB Clamps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With respect to the M5 grid of the Cubiko ground plate, common cnc clamps are not always sufficient.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 121
- Makes
- 1
- Views
- 606
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The cnc clamps here were designed in order to get the biggest possible working area for three different PCB dimensions: 70x50, 100x70 and 120x80 (mm).
For good results: clamps should be mounted as symmetric as possible (with respect to board outline) and tightened from left to right or from middle axis to outside.
In the images shown: pcb clamp 14 (light grey), pcb clamp 19 (red), pcb clamp 24 (black) and pcb clamp 32 (yellow).
Printed with PETG, 4 perimeters and 40% infill.