Prusa CORE One/+ MMU3 Y-Splitter COLLET (compatible with Enclosed version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa CORE One MMU3 Y-Splitter COLLET, avoids swapping tubes between MMU3 and regular use.
- Rating
- 4.909 / 5
- Likes
- 77
- Downloads
- 363
- Makes
- 11
- Views
- 1,350
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version.
Since the length of the original PTFE-Tube is 390mm the length of the two PTFE-Tubes is as follow:
1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)
1x PTFE Tube 4x2.5x311.7mm (between Y-Splitter and Extruder)
Additional parts required:
3x Collet
Print Settings:
print in upright position as shown in the shared picture
Material: Prusament PETG
Print Settings: 0.1mm FAST DETAIL
Infill
Fill densitiy: 100%
Fill pattern: Rectilinear
Skirt and brim
Brim width: 8mm
Support Material
no support material