1 / 2
Gear Ratio Demonstration Gear Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple demonstration of a 5:1 gear ratio using 50 and 10 tooth gears.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 94
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Public Domain
5:1 gear ratio gear box for demonstration.
Gears are aligned in the middle with spacers and the shafts and handles are held in place by c-clips that act as shaft collars. The c-clips can be hard to snap on but you can just slide them on from the end of the shaft.
Print everything with 15% infill and print the 50 tooth gear with supports. There are files for single pieces as well in case one is lost or doesn't turn out well.