Treedix HDMI cable tester case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modification of the Treedix USB cable tester case by @vtraveller_129909
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a modification of a case for the USB cable tester by Treedix, modified to fit their HDMI cable tester.
For mine I left the top open in case I needed to use a multi-meter with the pin test pads, and instead put the clear plexi cover that comes with it to the bottom to prevent shorts if I set the tester on something conductive. To not press against the solder points on the bottom I spaced the plexi cover using a simple frame spacer that I made by printing the top 1mm or so of a different bottom case which left a square-ish opening in the middle where I could still read the writing on the bottom of the PCB. Small washers would also work. I connected everything together with M2 screws and heat-inserts, but you may be able to get by with larger screws directly screwed into the pastic.
If I was to suggest a further remix for this, I would say modify the frame around the battery to allow for removal of the battery without disassembling. If it bugs me replacing the battery I'll have a stab at it if no one else does first.
Re-uploaded on Aug 05, 2025 with a correction to a couple walls that were inadvertently shifted.
Original:
Treedix USB Cable Tester Case
By vtraveller / @vtraveller_129909 on printables.com
https://www.printables.com/model/740305-treedix-usb-cable-tester-case
CC-BY 4.0: http://creativecommons.org/licenses/by/4.0/