1 / 1
Hi-Lite (Hijinx Lite) Pump for SFI X springs — image 1

Hi-Lite (Hijinx Lite) Pump for SFI X springs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Get a little more draw out of your lynx without giving up SFI X spring compatibility

Rating
0 / 5
Likes
8
Downloads
16
Makes
0
Views
173
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Add 5 to 10 mm of draw to your X springed Lynx by using a little more of the springs free height. Can't guarantee that X springs won't take a set from the higher max compression over time, so the 5mm extension takes 5mm out from precompression instead to play it safe. Untested for X2 and X1, but X3 is already within a few mm of its solid height with 5mm more compression. Introduces some bumps in the prime due to the extension pushing the plunger catch nut outside of the guide, which could be mitigated.

5% with a 5mm spacer recommended: pulling from precompression may be hurting consistency of the plunger at the end of its stroke, so using only 5mm of additional compression should be more consistent. There isn't enough compression available from an X3 to go much further. X5 also cannot take 5mm of additional compression.

Requires Hijinx catch 1 and plunger tail
https://www.printables.com/model/1093231-hijinx-extended-draw-lynx-remix

Hardware:
(optional) requires the stock plunger guide be trimmed by the amount you extend, or a printed guide

8-6-2025: added printed guide with a chamfer to help guide the stock catch nut transition smoothly into the guide

Tags