Pied d'escabeau paramétrique - Parametric stepladder foot
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.84 – €1.02 net (excluding VAT)
For file: pied escabeau 2_0.4n_0.2mm_PETG_MK4SMMU3_55m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 54.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fichier freecad modifiable sans connaissance - Freecad file that can be edited without any knowledge
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Dimensions intérieures du tube 47 x 17 mm
Les dimensions de ce modèle peuvent être modifiées dans le tableur du fichier freecad.
Aucune connaissance nécessaire.
les dimensions modifiables figurent dans les cellules vertes. Les autres sont calculées et ne doivent pas être touchées. La valeur doit être rentrée sous la forme “xx mm”. Ne pas oublier “mm”
Ensuite exporter l'objet “pied à exporter” et l'imprimer.
Pour ce faire j'utilise des support sous l'arrondi. Comme il touche le sol l'état de surface n'est pas tres important.
----------------------------------------------------------------------------------------
Internal dimensions of the tube: 47 x 17 mm
The dimensions of this model can be modified in the spreadsheet of the FreeCAD file.
No knowledge required.
The modifiable dimensions are shown in the green cells. The others are calculated and should not be touched. The value must be entered in the form “xx mm”. Do not forget “mm”.
Then export the “pied a exporter” object and print it.
To do this, I use supports under the curve. As it touches the ground, the surface finish is not very important.