Formbot Voron 2.4r2 ACM Grommets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect your wires from sharp edges where they feed through the ACM panel
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
The ACM deck panel used in the Formbot Voron 2.4r2 kits is unacceptably sharp on the edges where the wires are fed through.
These grommets will sit inside the holes and provide protection for your wiring. Let's play it safe and not have any bed wiring shorts folks.
I am not sure about the dimensional consistency on these hole cuts. These fit my machine, please let me know if they do not fit yours.
Printing guidance:
- Use something high temp, I used ASA for mine.
- The dimensions are mostly correct for 0.2mm layer heights and a 0.4mm nozzle, but you can probably get away with a lot if you use arachne on this.