Counting matching models…
LED bar holders to replace the ones supplied with Formbot Voron 2.4 kit. For better lighting and saving your eyes :) bar oriented 45° down. Highly recommend mounting it on the front top extrusion. For mounting: M3x20 SHCS - 2pcs. M3 T-nut…
I modified the original No Drop Nuts mod to make assembly of the Micron+ 180 a lot easier. The 10 mm retainer only has one guide that can be easily removed. The retainers hold the nuts in place even without the guides. Two of these can be…
With my formbot kit the brush was 7mm too wide and 3mm too high, and now it sits flush with the bed and the bucket.
Original Formbot filament sensor is used to be inside of the chamber. This holder is designed to hold the filament sensor outside the chamber so it works even with ABS printing. (You do not have to open the door and change filament inside…
Hello, I found the original LED kit quite ugly, so I designed new brackets and a diffuser to fit it. The inclination is made at 45° to better distribute the light. You can manage the wires into the support (see photos) and hide it in the…
This mounts the short chamber thermistor included in the Formbot Voron 2.4 kits by its JST connector to a 2020 extrusion. Add an M3 hammer-head T-nut, and use an M3x8mm bolt to secure it. I wanted a clean way to mount the chamber…
Formbot sensor-filament outside bracket *Update 02/02/2025 PC4-M10 added Hello, Recently my sensor housing broke for some unknown reason, possibly hitting a part of the printer. So and as I had been thinking about it for a while, I made a…
Formbot corners with hole for connector, dont forget add supports!
The Formbot Voron Trident kit comes with a 3 hole cable chain and separate connectors for each device on the extruder. The Voron part for securing the cables doesn't work (its backwards and the screws are too short), so I modified…
bed spacer holder for Formbot kits that uses the bakelite bed spacers. This is designed for 1515 extrusion please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other…
UPDATE 1: I've created a skirt mod to accommodate the bigger fan if you plan on installing the electronics cabinet cover. Check it out here on printables . I love this cooler for my Voron, but it wouldn't work with the Xplorer as it is…
For using Formbot kit with stock idlers (not BFZ)
The LDO door kit I got had horizontal/short extrusions that were cut about 1mm longer than the frame extrusions included in the Formbot V0.2 kit I got. This prevented the Mini-Fridge door latch from engaging properly and allowed the door…
bed spacer holder for formbot kits that use bakelite bed spacers. Use hammer T-nuts and m3x8 socket head the picture isnt bakelite spacer but you get the idea. please leave ⭐ review and rate. Check out my other designs.…
The ACM deck panel used in the Formbot Voron 2.4r2 kits is unacceptably sharp on the edges where the wires are fed through. These grommets will sit inside the holes and provide protection for your wiring. Let's play it safe and not have…
I use it for the Formbot RGB Led's with the original printed corners. https://github.com/ArmoredTurtle/BoxTurtle/blob/main/STLs/Base_Build/Printed_Corners/corner_printed_x4.stl If you pinout the connectors, it is no Problem to use the…
A basic Voron 2.4 bowden tube holder, modded to include a filament sensor, relying ONLY on parts harvested from the runout sensor provided by Formbot in their kit. I wanted a filament runout sensor and didn't like (nor understand) the…
Improved cooler design for the FORMBOT Raptor that uses the stock fan and mounting points. You will need M3 bolts and washers as well as an M3 tap is recommended to clean up the bold holes in the cooler. Washers are needed under the bolt…
This model implements a the cartographer probe, and by proxy likely a beacon probe for z probing and bed meshing. This has been tested for several hundred hours on pretty custom formbot explorer printer and works pretty nicely. There are…
Updates: 2026-10-15: archiving self tapping style, not strong enough for the top had hold downs. Updated 3mf with brims and removed self tappers. 2026-10-14: shortened blanks and added wings so they press in and stay put. 2026-10-13:…
this is a manifold to exhaust fumes through a 2” flexible duct. It is designed to be used with the Formbot Marathon IDEX printer. this model utilizes a 2” duct adapter found here:…
Keyback umbilical support bracket. printed in ABS. Use two M5x20mm screws and two M5 nuts to replace the existing two top hat acrylic mount screws.
The Formbot kit references a main body to house the BigTreeTech EBB SB2209 board that requires a slightly bigger PCB cover. This fits the model found on the Formbot GitHub page, but with the openings to allow for cooling of the PCB. If…
This is a specific model designed fot the Formbot led kit for the BoxTurtle
Note this is a work in progress, I have not fully assembled the printer with these so there might be some mistakes. The top hat is 100% tested. Frustration-free assembly of the Voron 0.2 Trim Nuts. Trim Nuts meaning, a slide in trim and…
This is a collection of all of the mods I did to make the rapido hot end 2f UHF work on the xplorer. First is the modified duct. This rides pretty low to the bed with only a couple of mm clearance between the bottom of the duct and the…
This model has two options per skirt. The first option is to download the non-modifier step file for the skirt and you can paint the inlay for hexagon a different color in the slicer. This creates a solid color inside of the hexagon. The…
TPU Grommet to protect wires passing through Formbot 2.4 R2 350mm deckplate. No support. Print with wider flange on bedplate. Split and non-split options.
This is a specific model designed fot the Formbot led kit for the BoxTurtle
I already routed the wiring, didn't want to cut or resolder, so I added a slit to push the wire through
Since we all know it's in bad taste to mount our spools directly to the top of a printer frame (Since it intensifies defects from vibrations), I modeled some pieces to replace the spool holders at the top of the Formbot (AKA Vivedino)…
These are all of the STL Files for any 3D printed part for our Formbot (apparently now called Vivedino) T-Rex 3.0 printers. I got these directly from the manufacturer. Hope this helps anyone like it did me! Category: 3D Printer Parts
These are all of the STL Files for any 3D printed part for our T-Rex 2+ printers. I got these directly from the manufacturer. Hope this helps anyone like it did me! Category: 3D Printer Parts
Made this model to fit my Formbot build. I had trouble with other posted models as they were either designed for other extrusions or had parts that would interfere with printed parts that slotted partially into the extrusion gap.
Clamp part of the stronger clamp mount made compatible with the Formbot Extrusions This should work with all stronger clamp mount variants but I only tested it with the 12032 variant.
X axis belt tensioner for Formbot Raptor v1 and possible other printers The knob for tension is designed by funbart https://www.thingiverse.com/thing:641854 You wil need one M5x30 or longer hex head bolt one M5x35 or longer bolt one…
This is a simple clamp for the frame end of the cable chain. It clamps the chain to the 4040 extrusion. Print Settings Printer: Formbot Rafts: No Supports: No Resolution: 0.2mm Infill: 50% Category: 3D Printer Accessories
NOTE2: It finished printing, and I installed it. Couple problems I had are that the holes are about .5mm too wide, so the head of the screw sits into the hole a little. I think button head screws would be fine. I used socket head. If you…
My Voron V0.2 Formbot kit had a longer reset button on the display wich bend up the original lever ending in a constant reset. Had to break it free to continue to use my printer. This model has a hole in it for the button to fit in.
Adjusted the arcs on the top to be lower so it wont touch the filament on heavily loaded spools also made the walls of the bearings slightly thicker and added a plate so you can mount on top of a Formbot Raptor or other big printer with…
My filament strand popped off the roll on one print so decided to make this small design to keep the filament on the roll. You will need to find a spare nut and screw to attach, or print one out. ENJOY Category: 3D Printer Accessories
Made the bracket thicker so does not split when screwed.
