LED MODIFICATION FORMBOT KIT VORON 2.4 PRO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To change the style of the kit led provided in the Formbot kit V2.4 pro.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 120
- Makes
- 0
- Views
- 1,451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Hello,
I found the original LED kit quite ugly, so I designed new brackets and a diffuser to fit it. The inclination is made at 45° to better distribute the light.
You can manage the wires into the support (see photos) and hide it in the Voron extrusions rails. By security i put a piece of shrink tubing near to the aluminium rail to protect of cutting edges.
On the photo the Voron logo is reverse on the right side because I made a mirror on the part, the stl file is corrected. If this interests you, here are the printing tips:
Support R & L : ABS infill 40% @ 0.2 mm (Voron ABS print recommendation)
Diffuser : PETG transp, infill 100% @ 0.1 mm ironing mod activated
Print in stl orientation, no supports.
For the mounting on the extrusion i use 2 M3 x 20 SHCS ( a little short, but 25 mm did not pass) and 2 M3 Tnut.
If you want to modify it you can access with the public Onshape doc “Formbot led mod” and if you do not want to print the new light diffuser, there is a model by Doba which keeps the original rounded:
https://www.printables.com/fr/model/691490-formbot-kit-led-bar-holder
Good print !