LED MODIFICATION FORMBOT KIT VORON 2.4 PRO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To change the style of the kit led provided in the Formbot kit V2.4 pro.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hello,
I found the original LED kit quite ugly, so I designed new brackets and a diffuser to fit it. The inclination is made at 45° to better distribute the light.
You can manage the wires into the support (see photos) and hide it in the Voron extrusions rails. By security i put a piece of shrink tubing near to the aluminium rail to protect of cutting edges.
On the photo the Voron logo is reverse on the right side because I made a mirror on the part, the stl file is corrected. If this interests you, here are the printing tips:
Support R & L : ABS infill 40% @ 0.2 mm (Voron ABS print recommendation)
Diffuser : PETG transp, infill 100% @ 0.1 mm ironing mod activated
Print in stl orientation, no supports.
For the mounting on the extrusion i use 2 M3 x 20 SHCS ( a little short, but 25 mm did not pass) and 2 M3 Tnut.
If you want to modify it you can access with the public Onshape doc “Formbot led mod” and if you do not want to print the new light diffuser, there is a model by Doba which keeps the original rounded:
https://www.printables.com/fr/model/691490-formbot-kit-led-bar-holder
Good print !