Watercooling pressure test adapter g1/4 to schrader valve (bike/car valve)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter fitting for testing if your loop can hold pressure, with a simple bike/car (schradervalve) pump with a guage.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 0
- Views
- 249
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Did not wanna pay for an expensive pressure tester.. Made this and tried to make it easy to print. When I tested my loop with it, it held pressure for more than 15 minutes at 0.45 bars (~6.5 psi). Used the same type of O-ring that came with my other g1/4 fittings.
Printing tips:
Works with PLA, but PETG may hold better.
0.16mm layer hight may make the threads print better
Printing with a higher temperutare may make it hold pressure better.
Adding more wall loops may help it hold up better.
Increasing infill may make it hold better.