Reinforced K-Cup Recycler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've been using my K-Cup Recycler v6 daily for months. With frequent use, the bolts would continually twist off…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 2
- Views
- 950
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I've been using my K-Cup Recycler v6 daily for months. With frequent use, the bolts would continually twist off because I needed to repeatedly tighten the nuts. I finally decided to reinforce them. These bolts and nuts are a little heavier with a coarser thread.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
200 (.2 mm)
Infill:
15% except for K-Cup_RecyclerNewBottom. Better apply 25% to that one. Be sure to use 3 shells for all.
Filament: Any brand filament PLA Any color filament
Notes:
The only new files are
K-Cup\_RecyclerNewBottom.stl
K-Cup_RecyclerNewMiddle.stl
K-Cup_RecyclerNewTop.stl
K-Cup_RecyclerTopNut.stl (2 needed, of course)
If you can manage to pry apart the glued Retainer and Gripper ring from your existing K-Cup Recycler v6 without damaging them, you only need to reprint the above 4 items to beef yours up.
Listed at Thingiverse as remix of
K-Cup Recycler v6
https://www.thingiverse.com/thing:4683310
NUT JOB | Nut, Bolt, Washer and Threaded Rod
https://www.thingiverse.com/thing:193647
Category: Kitchen & Dining