1 / 4
Prusa CORE One/+ MMU3 4-Way-Splitter COLLET (compatible with Lite version) — image 1
1 / 4

Prusa CORE One/+ MMU3 4-Way-Splitter COLLET (compatible with Lite version)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Prusa CORE One MMU3 4-Way-Splitter FESTO, avoids swapping tubes between MMU3 and regular use.

Rating
0 / 5
Likes
16
Downloads
57
Makes
0
Views
408
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version.

Since the length of the original PTFE-Tube is 450mm the length of the two PTFE-Tubes is as follow:

  • 1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)

  • 1x PTFE Tube 4x2.5x296.3mm (between Y-Splitter and Extruder)

Additional parts required:

Print Settings:

  • print in upright position as shown in the shared picture

  • Material: Prusament PETG

  • Print Settings: 0.1mm FAST DETAIL

  • Infill

    • Fill densitiy: 100%

    • Fill pattern: Rectilinear

  • Skirt and brim

    • Brim width: 8mm

  • Support Material

    • no support material

Tags