V0.2 Annex K3 Style Door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the hinges and made an anchor for the magnets, BOM attached below
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 19
- Makes
- 0
- Views
- 496
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
B.O.M
4x - SHCS M3x12mm
2x - BHCS M3x25mm
8x - BHCS M3x10mm
2x - BHCS M5x40mm
2x - M5 Nylock Nuts
4x - 6mm OD x 3mm L Magnets
8x - ‘Voron’ Style Heat Set Inserts
4x - F695ZZ Flanged Ball Bearing*
350x230x5mm Acrylic Panel
~1.5m 15x3mm Foam Tape
* Mine carry that name, however according to spec they're supposed to be 5mm ID, in practice they're 6mm so I tapped ‘Hinge_C_1515’ with an M6 tap and used 4x BHCS M6x12mm. The important thing is (for the bearings) to have them 12mm OD x 4 mm H and the ID can be 5 or 6 as long as it's compatible with your screw of choice.