Raspberry Pi 4B DIN rail mount with optional fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN rail mount for Raspberry Pi 4B with optional fan
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 276
- Makes
- 2
- Views
- 1,661
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
DIN rail mount for the Raspberry Pi 4B with an optional mount fo a 60mm fan.
Prints without supports.
Printed in PETG at layer height 0.2mm.
I mountend the Raspberry with M3 brass standoffs. The Raspberry is designed for M2.5 screws! I used a 3mm drill bit to make the holes larger!
Fan Mount is designed for M3 heat inserts.
The fan mount has clips to hold the fan in place. I didn't use screws for the fan. The fan mount is designed for a 60mm fan (60x60x13.5). There is a version with a cable guide for the Raspberry Pi Camera and one without it.
Update 27.10.2023: fan mount for 60x60x25 mm fan added.
DIN Rail Mount is based on the Voron DIN rail clip. (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl)
Hardware needed:
- M3 bolts for the Raspberry, 8x M3x6 mm
- PCB standoffs brass, 4x M3x10 mm
- M3 heat inserts for mounting the fan, 2x
- M3 bolts for mounting the fan, 2x M3x6 mm