Raspberry Pi 4B DIN rail mount with optional fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN rail mount for Raspberry Pi 4B with optional fan
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 276
- Wydruki
- 2
- Wyświetlenia
- 1661
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
DIN rail mount for the Raspberry Pi 4B with an optional mount fo a 60mm fan.
Prints without supports.
Printed in PETG at layer height 0.2mm.
I mountend the Raspberry with M3 brass standoffs. The Raspberry is designed for M2.5 screws! I used a 3mm drill bit to make the holes larger!
Fan Mount is designed for M3 heat inserts.
The fan mount has clips to hold the fan in place. I didn't use screws for the fan. The fan mount is designed for a 60mm fan (60x60x13.5). There is a version with a cable guide for the Raspberry Pi Camera and one without it.
Update 27.10.2023: fan mount for 60x60x25 mm fan added.
DIN Rail Mount is based on the Voron DIN rail clip. (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl)
Hardware needed:
- M3 bolts for the Raspberry, 8x M3x6 mm
- PCB standoffs brass, 4x M3x10 mm
- M3 heat inserts for mounting the fan, 2x
- M3 bolts for mounting the fan, 2x M3x6 mm